Petro-Clear 51110P

Weight:

SKU:

Description

The PetroClear model 51110P is a particulate removing spin-on filter designed to remove particulate from neat gasoline, Ethanol blended gasolines, diesels, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils. 

This model utilizes a standard 1.5"-16 UNF mounting thread ref. (1" flow) required for most spin-on filter adapters used in aftermarket and/or high-flow applications.

Adapters are available for models 51103P, 51110P and 51130P in aluminum. These adapters are available in both NPT or BSP inlet/ outlet threads. Inlet/outlet sizes are available in 1" and 1.5" single adapters. Adapters are also available in a dual style with both 1.5" and 2" inlet/outlet (2"– 4" bolt SAE flange combination).

Each filter is packaged with a separate gasket that will fit most standard brands of adapter filter mounting bases. Install gasket in adapter’s groove by placing in groove at 3 to 4 places and then smoothing gasket between those points. Lubricate with light oil. NOTE: Gasket does not mount on filter!

If using this filter in a hydraulic/lube oil application, verify that you are applying the filter on a spin-on filter head that has a by-pass valve. 

The PetroClear 51110P Cross References with the Cim-Tek 70019, 800-10.


Model 51110P
Filter Type Spin-On
Media Type *Cellulose
Micron Rating 10 Micron (nominal)
Diameter 5.00"
Height 11.37"
Mounting Thread 1.5" –16 UNF
Flow Rate 40 gpm (151 lpm)
Flow 1" flow
Shell Thickness 0.020
Gasket Material Buna N
Collapse (Min.) 150 psid (10.3 bar)
Burst (Min.) 200 psi (13.5 bar)
Max. Operating Temp. 250°F (139°C)

IF YOU EXPERIENCE FREQUENT FILTER CHANGES, IT IS RECOMMENDED THAT YOU HAVE FUEL SAMPLES ANALYZED TO DETERMINE THE SOURCE OF CONTAMINATION, SUCH AS WATER, DIRT, RUST, BACTERIA, PHASE SEPARATION, ETC.

← Previous Product Next Product →