Description
The PetroClear model 51110P is a particulate removing spin-on filter designed to remove particulate from neat gasoline, Ethanol blended gasolines, diesels, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils.
This model utilizes a standard 1.5"-16 UNF mounting thread ref. (1" flow) required for most spin-on filter adapters used in aftermarket and/or high-flow applications.
Adapters are available for models 51103P, 51110P and 51130P in aluminum. These adapters are available in both NPT or BSP inlet/ outlet threads. Inlet/outlet sizes are available in 1" and 1.5" single adapters. Adapters are also available in a dual style with both 1.5" and 2" inlet/outlet (2"– 4" bolt SAE flange combination).
Each filter is packaged with a separate gasket that will fit most standard brands of adapter filter mounting bases. Install gasket in adapter’s groove by placing in groove at 3 to 4 places and then smoothing gasket between those points. Lubricate with light oil. NOTE: Gasket does not mount on filter!
If using this filter in a hydraulic/lube oil application, verify that you are applying the filter on a spin-on filter head that has a by-pass valve.
The PetroClear 51110P Cross References with the Cim-Tek 70019, 800-10.
| Model | 51110P |
|---|---|
| Filter Type | Spin-On |
| Media Type | *Cellulose |
| Micron Rating | 10 Micron (nominal) |
| Diameter | 5.00" |
| Height | 11.37" |
| Mounting Thread | 1.5" –16 UNF |
| Flow Rate | 40 gpm (151 lpm) |
| Flow | 1" flow |
| Shell Thickness | 0.020 |
| Gasket Material | Buna N |
| Collapse (Min.) | 150 psid (10.3 bar) |
| Burst (Min.) | 200 psi (13.5 bar) |
| Max. Operating Temp. | 250°F (139°C) |