The PetroClear model 51130P is a particulate removing spin-on filter designed to remove particulate from neat gasoline, Ethanol blended gasolines, diesels, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils.
This model utilizes a standard 1.5"-16 UNF mounting thread ref. (1" flow) required for most spin-on filter adapters used in aftermarket and/or high-flow applications.
Adapters are available for models 51103P, 51110P and 51130P in aluminum. These adapters are available in both NPT or BSP inlet/ outlet threads. Inlet/outlet sizes are available in 1" and 1.5" single adapters. Adapters are also available in a dual style with both 1.5" and 2" inlet/outlet (2"– 4" bolt SAE flange combination).
Each filter is packaged with a separate gasket that will fit most standard brands of adapter filter mounting bases. Install gasket in adapter’s groove by placing in groove at 3 to 4 places and then smoothing gasket between those points. Lubricate with light oil. NOTE: Gasket does not mount on filter!
If using this filter in a hydraulic/lube oil application, verify that you are applying the filter on a spin-on filter head that has a by-pass valve.
|Micron Rating||30 Micron (nominal)|
|Mounting Thread||1.5" –16 UNF|
|Flow Rate||40 gpm (151 lpm)|
|Gasket Material||Buna N|
|Collapse (Min.)||150 psid (10.3 bar)|
|Burst (Min.)||200 psi (13.5 bar)|
|Max. Operating Temp.||250°F (139°C)|