Petro-Clear 40830P-DV

Weight:

SKU:

Description

The PetroClear model 40830P-DV is a particulate removing spin-on filter designed to remove particulate from neat gasoline, Ethanol blended gasolines, diesels, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene and fuel oils. This filter is designed for particulate removal only and will not react to water in gasoline or diesel fuel nor to phase separation in alcohol blended gasolines by slowing flow.

The 40810P-DV utilizes a standard 1"-12 UNF mounting thread ref. (3/4" flow) required for most spin-on filter adapters used in aftermarket.

This filter has a petcock type drain valve located in the bottom of the filter for convenient drainage of collected water. It utilizes a silicone treated media designed for applications where excessive water contamination in fuel can be dispensed and passed into consumers’ vehicles.

Adapters are available for models 40810P-DV and 40830P-DV in aluminum and cast iron. These adapters are available in both NPT and BSP inlet/outlet threads. Inlet/outlet sizes are available in 3/4" and 1" single adapters.

The PetroClear 40830P-DV Cross References with the Cim-Tek 70046, 200E-30.

 

Model 40810P-DV
Filter Type Spin-On
Media Type Cellulose with Silicone Treated
Micron Rating 10 Micron (nominal)
Diameter 3.70"
Height 6.87"
Mounting Thread 1" – 12 UNF
Flow Rate 25 gpm (94.6 lpm)
Flow 3/4" flow
Shell Thickness 0.02
Gasket Material Buna N
Collapse (Min.) 150 psid (10.3 bar)
Burst (Min.) 250 psi (17.2 bar)
Max. Operating Temp. 250°F (139°C)

PETROCLEAR FILTERS ARE NOT TO BE USED IN AVIATION FUEL APPLICATIONS.