Petro-Clear 51130P

Weight:

SKU:

Description

The PetroClear model 51130P is a particulate removing spin-on filter designed to remove particulate from neat gasoline, Ethanol blended gasolines, diesels, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils.

This model utilizes a standard 1.5"-16 UNF mounting thread ref. (1" flow) required for most spin-on filter adapters used in aftermarket and/or high-flow applications.

Adapters are available for models 51103P, 51110P and 51130P in aluminum. These adapters are available in both NPT or BSP inlet/ outlet threads. Inlet/outlet sizes are available in 1" and 1.5" single adapters. Adapters are also available in a dual style with both 1.5" and 2" inlet/outlet (2"– 4" bolt SAE flange combination).

Each filter is packaged with a separate gasket that will fit most standard brands of adapter filter mounting bases. Install gasket in adapter’s groove by placing in groove at 3 to 4 places and then smoothing gasket between those points. Lubricate with light oil. NOTE: Gasket does not mount on filter!

If using this filter in a hydraulic/lube oil application, verify that you are applying the filter on a spin-on filter head that has a by-pass valve. 

The PetroClear 51130P Cross References with the Cim-Tek 70020, 800-30.

 

Model 51130P
Filter Type Spin-On
Media Type Cellulose
Micron Rating 30 Micron (nominal)
Diameter 5.00"
Height 11.37"
Mounting Thread 1.5" –16 UNF
Flow Rate 40 gpm (151 lpm)
Flow 1" flow
Shell Thickness 0.02
Gasket Material Buna N
Collapse (Min.) 150 psid (10.3 bar)
Burst (Min.) 200 psi (13.5 bar)
Max. Operating Temp. 250°F (139°C)

IF YOU EXPERIENCE FREQUENT FILTER CHANGES, IT IS RECOMMENDED THAT YOU HAVE FUEL SAMPLES ANALYZED TO DETERMINE THE SOURCE OF CONTAMINATION, SUCH AS WATER, DIRT, RUST, BACTERIA, PHASE SEPARATION, ETC.